Monthly Archives: February 2015

Use a better dye to make a camouflage design on clothing

Name: Billy
Country or region: USA
Message: I bought a pair of white cotton bib overalls and dyed them tan with rit dye according to directions. The tan set, then I sprayed them with dark green, dark brown, and black from spray bottle to camoflauge them. When I washed them, all but the tan washed out. What happened?

This is pretty much what you would expect to happen. Rit All Purpose Dye is meant to be applied by boiling the garment in the dye in a big pot for an hour. Warm water is not as good for Rit as extremely hot water, but it will work to some extent, as you saw with your tan dye. It will not work at all well when simply sprayed on the garment at room temperature.

What you need is a better type of dye. Fiber reactive dyes, such as Procion MX dye, can be applied directly, by spraying them on. These are the dyes that are popular for tie-dyeing, because they work so much better than all-purpose dyes. Instead of being set with high heat, they are set with washing soda or soda ash, a common laundry chemical.

There are many advantages to using Procion MX dye instead of Rit dye. The dye is far more permanent, and won’t run in the laundry to ruin other clothing like Rit dye does. You don’t have to ruin a cooking pot by using dye in it (you should not plan to reuse a dyeing pot for food). You have many more options for how to apply the dye. It even tends to cost less, since Rit dye is packaged with a lot of salt and detergent in little boxes that will dye only up to one pound of clothing each.

To use the Procion dye for your camouflage project, first soak your cotton overalls in a gallon of water in which you have dissolved one cup of soda ash, then remove them from the water, squeezing out as much of the excess liquid as you can, and spread the overalls out on a waterproof surface. Dissolve Procion MX dye in water, using about four teaspoons of dye powder per cup of water for dark colors. Wear a dust mask while working with the dry dye, so you don’t breathe any of the dye dust, because it can cause allergies. you can apply the dye (wearing waterproof gloves) by dribbling it onto the fabric with a pointy-tipped squirt bottle, or by dipping a sponge in it and applying it to the fabric, or by placing the dye mixture into spray bottles and spraying (wear a dust mask so you don’t accidentally breathe any dye mist). Keeping in mind that the dye will be lighter in color after you wash out the excess, be sure to apply enough dye to make the garment much darker than you want.

The wet dyed items then need to remain damp overnight in a warm place, 70 degrees Fahrenheit or warmer. If you live in a dry climate, you’ll need to do something to keep the overalls moist while the dye reacts overnight. You can place them inside a plastic bin with the lid on—a camouflage pattern will probably not be spoiled by having wet dye from one part of the garment bleed onto another part where they come into contact—or you can wrap them in plastic wrap, or, instead, you can mix urea into your dye mixture, because urea in the mixture attracts moisture and helps keep the garment damp enough for a long time, even if it feels pretty dry.

After you’ve left the dye to react, the next day (or a day after that, if it’s more convenient), you should wash the overalls once in cool water to remove the soda ash and the largest part of the unused dye, than wash it twice in the hottest water you can to remove the rest of the excess unattached dye. It’s best to turn up the water heater to 140 degrees Fahrenheit for this washing out step, but if you use cooler water you just have to take more care to wash the garment separately the first few times, since there will be some excess dye that can transfer onto other clothing if it is left lying around damp at some point in the wash. Of course the original tan Rit dye is apt to run when wet, and it will tend to wash completely out after a while. If all of your tan dye washes out, you will want to get some tan Procion dye to replace it with.

Where can you buy Procion MX dyes? Most people who do a lot of dyeing buy their dye by mail-order from dye suppliers such as Dharma Trading Company, which also sells soda ash and urea, but you can buy Procion dye from many different sources in the form of a tie-dye kit. Jacquard Products (a dye manufacturer) makes this especially easy for your project by producing a Camo Tie Dye kit, which you can buy from many different art and crafts suppliers, or from Amazon, or even, depending on the time of the year, from stores such as Walmart. It contains premixed dye powders in olive, black, and bronze.

(Please help support this web site. Thank you.)


Forums and Mailing Lists About Dyeing

Name: Maggie
Country or region: US
Message: I followed both the Dyerslist and your forum for quite a long time although I didn’t post much. I’ve been trying to find another list to join, but I haven’t been successful. I tried to join Jaja’s list, but I get a message that safari can’t open that page (that’s after I have posted to subscribe to the group – it gets hooked up on the second step). I also tried to join the Natural Surfaces group a couple of times but haven’t gotten a response. I do low immersion dyeing, screen printing, ‘eco’ bundle dyeing and I’m starting to get interested in natural dyes. I’ve worked quite a bit with indigo. Any pointers? Thanks so much – Maggie

The Dye Forum, on my site, is a sad story. I have not been able to resurrect it. I still have the old posts, but the old Drupal content management platform it ran on was the subject of so many spam attempts to register that the server kept crashing, and I was unable to get a new version of Drupal to work. It’s not really an appropriate platform for a non-professional.

Last week’s attack on the WordPress blogs on my site was caused by a similar attack to the Drupal one: it’s nothing personal, just too many spam robots trying to insert comments with pointless advertisements (mostly for shoes, of all things) at the same time. Even though they cannot succeed in posting their comments, the sheer volume of their attempts causes trouble. I would like to recreate the Dye Forum when I get the time and energy to do so. I have tinkered with setting up a WordPress forum in my All About Hand Dyeing Q&A, but haven’t gotten it going yet.

Stephen O’Connor’s Tie Dye Forum is down, presumably for similar reasons.

EMU’s long-respected DyersLIST mailing list was taken down in 2013, some time after the death of its moderator, Pat Williams. Its replacement is the_dyerslist, at, which was started by Jaja Pankova. The mail interface commands are available online at This is the best all-purpose mailing list about all forms of dyeing. [Note: this paragraph was updated on February 9, 2015.]

I still have copies of the archives from the old EMU DyersLIST.

The Jacquard Products Forum, at the dye company’s website, is still up, but it is full of spam advertising. It need to be cleaned up. I hope that the company doesn’t decide to discontinue it, instead.

The Complex Cloth mailing list, is still active and fully functional. “A list devoted to the creation of art cloth, or complex cloth, based upon the techniques presented in Jane Dunnewold’s book, Complex Cloth.” Membership is restricted; I don’t know what the policies are for whether new members can join. The email address for subscribing is .

The Natural Surfaces group on yahoo groups is run by Kimberly Baxter Packwood. It does not appear to have many posts these days; it looks like most are just monthly repostings of the rules files.

The Natural Dyes Mailing List on yahoo groups, in contrast, has considerably more postings by list members. The email address for subscribing is .

One of the most active groups right now that I see is the excellent Addicted to Tie Dyeing Facebook group. Even if you are not a Facebook user, you may want to set up a Facebook account (you can do this with minimal information about yourself if you prefer), so that you can access this group. You can set it up so that you receive an email for each new post in the group.

Please feel free to comment here on this blog. You won’t see your comment appear immediately, since I have to approve comments individually in order to distinguish real comments from spam, but I will certainly approve your comments. I approve all non-spam comments.

(Please help support this web site. Thank you.)


Where can I buy your dyes in South Africa?

Name: Samson
Country or region: South Africa
Message: Can you please give me information on where can I buy your dyes in South Africa? Do you have distributors in South Africa?

I don’t sell dyes in South Africa, but I can tell you someone who does.

Melanie Brummer, at Slipstream Dyes and Prints, sells Remazol type fiber reactive dyes. She is the author of the book, “Contemporary Dyecraft: Over 50 Tie-dye Projects for Scarves, Dresses, T-shirts and More”, which gives instructions for projects that use these dyes.

The Remazol type dyes are among my favorites; they require a little more warmth to react with the fiber than Procion dyes do, but they have similar properties. They can be used with any natural fiber, given the right recipe. For more information about this type of dye, see my page, “About Vinyl Sulfone Fiber Reactive Dyes“.

See Melanie Brummer’s website, or phone 083 568 9150, or email Choosing the “Buy Now” link on the Slipstream site leads you to the Crafter’s Den, which says it is located at 37 Voortrekker Avenue, Edenvale 1609; see their contact page.

(Please help support this web site. Thank you.)